Hear from Our Customers
Your air clears up. The musty smell disappears. You stop worrying every time someone in your house coughs or complains about a headache.
Real mold remediation means you can breathe easier literally. No more wondering if that dark spot in the basement is spreading behind the drywall. No more anxiety about what a home inspector might find if you ever decide to sell.
When mold removal is done right, your property value stays intact. Buyers don’t walk away. Insurance companies don’t flag your home. And you’re not dealing with the same problem six months later because someone only treated the symptoms instead of the source.
You get your home back. Clean air. Dry surfaces. Peace of mind that your biggest investment isn’t quietly deteriorating while you sleep.
We’ve spent over 15 years handling mold issues in Somerton, Bucks County, and across Northeast Philadelphia. We know what happens to century-old basements when humidity hits. We understand how flat roofs and poor ventilation create perfect conditions for mold growth in this area.
You’re not getting a national franchise that treats every home the same. You’re working with a local team that’s seen what Philadelphia weather does to older properties and knows exactly how to fix it.
We follow IICRC standards because that’s what actually works. Our process includes containment, HEPA filtration, removal of affected materials, and verification testing. Not because it sounds impressive, but because anything less means the mold comes back.
First, we come out for a free inspection. We’re looking for visible mold, but also using moisture meters and thermal imaging to find what’s hiding behind walls or under flooring. You get a clear assessment of what you’re dealing with no surprises.
If testing is needed, we send samples to a lab. Results come back within 24 hours. This tells us what type of mold you have and how aggressive our approach needs to be.
Then we contain the affected area to prevent spores from spreading during removal. HEPA vacuums and air scrubbers run continuously. We remove contaminated materials drywall, insulation, whatever can’t be salvaged. What can be cleaned gets treated properly.
After removal, we verify the air quality. You’re not taking our word for it you’re getting documentation that the mold is gone. If there’s a moisture problem causing the growth, we identify it so you can address it and prevent this from happening again.
Ready to get started?
You get a thorough inspection with advanced detection equipment. We’re not just eyeballing your basement we’re using technology to find moisture and mold in places you can’t see.
Testing and lab analysis when needed. Air quality samples. Surface samples. Whatever it takes to understand the full scope of your mold problem.
Complete containment and removal following professional standards. This isn’t a guy with a spray bottle and a mask from the hardware store. It’s a controlled process designed to eliminate mold without contaminating the rest of your home.
In Somerton and throughout Bucks County, we see a lot of basement mold from old foundations and poor drainage. Finished basements are especially tricky mold grows behind drywall where you can’t spot it until it’s a major problem. We also handle attic mold from roof leaks and HVAC issues that create condensation in crawl spaces.
You get documentation for insurance claims if needed. And you get honest answers about what’s causing the mold so you can fix the root problem, not just the symptoms.
Most mold remediation projects in the Somerton area run between $1,500 and $4,000, depending on how much mold you have and where it’s located. A small area in a bathroom might cost less. A finished basement with mold behind drywall throughout costs more.
The size of the affected area matters most. So does accessibility mold in an open basement is easier to handle than mold behind finished walls or in tight crawl spaces. If we need to remove a lot of material or if the mold has spread to HVAC systems, that affects cost too.
We give you an upfront estimate after the inspection. No hidden fees. You know what you’re paying before any work starts. And if your insurance covers mold remediation, we can work with them on the claim.
A typical mold remediation job takes two to five days. Small, contained areas might be done in a day or two. Larger projects with extensive contamination take longer.
Here’s what affects timeline: how much area is contaminated, whether we need to remove building materials like drywall or flooring, and how long it takes for affected areas to dry completely after treatment. We can’t rush the drying process moisture is what caused the mold in the first place.
Testing adds a day on the front end if we need lab results before starting. Verification testing happens after we’re done to confirm the mold is actually gone. You’re not moving back into a treated area until we know it’s safe.
We work as fast as possible without cutting corners. Your timeline matters, but doing it right matters more.
It depends on where the mold is and how extensive the contamination is. If we’re treating a small area in your basement and can seal it off completely, you can usually stay. If mold is widespread or in your HVAC system, you might need to leave temporarily.
We set up containment barriers and negative air pressure to keep mold spores from spreading to other parts of your home. HEPA air scrubbers run continuously during the work. But if you have young children, elderly family members, or anyone with respiratory issues or compromised immune systems, it’s safer to stay elsewhere during active remediation.
We’ll be straight with you during the inspection. If you need to leave, we’ll tell you. If you can stay, we’ll explain what precautions we’re taking to protect the rest of your home.
Most jobs don’t require you to move out completely. But your family’s health comes first.
Moisture. That’s it. Mold needs water to grow, and Somerton homes give it plenty of opportunities.
Old basements with stone or brick foundations let moisture seep through. Poor grading around the house directs water toward the foundation instead of away from it. Gutters that dump water right next to the house create constant dampness. Finished basements trap moisture behind drywall where it can’t dry out.
Roof leaks are common in older homes. So are plumbing leaks that go unnoticed for weeks or months. HVAC systems create condensation, especially in attics and crawl spaces with poor ventilation. Even normal activities like cooking and showering add humidity if your home doesn’t ventilate properly, that moisture has nowhere to go.
Philadelphia’s climate doesn’t help. Humid summers. Lots of rain. Older homes that weren’t built with modern moisture barriers or ventilation systems. Add it all up and you’ve got perfect conditions for mold growth.
Fixing the moisture source is just as important as removing the mold. Otherwise you’re just delaying the next outbreak.
Yes, but not always in the way people think. “Black mold” usually refers to Stachybotrys chartarum, which can produce mycotoxins that cause serious health problems. But not all black-colored mold is Stachybotrys, and not all dangerous mold is black.
Any mold growing in your home can cause health issues. Respiratory problems, headaches, skin irritation, congestion, and worsening asthma are common with most types of mold exposure. People with weakened immune systems, young children, and elderly family members are especially vulnerable.
The real danger isn’t necessarily the species it’s the exposure level and duration. Mold growing behind your walls releases spores into the air you breathe every day. That constant exposure adds up.
We test to identify what type of mold you have because different species require different approaches. But regardless of the type, mold doesn’t belong in your home. It needs to be removed properly, and the moisture source needs to be fixed.
Don’t wait to see if symptoms get worse. If you can see or smell mold, it’s time to deal with it.
Not if the moisture problem gets fixed. Mold remediation removes the existing growth, but it can’t prevent future mold if water keeps getting in.
We remove contaminated materials and treat surfaces to eliminate mold spores. We verify with testing that the mold is gone. But if your basement still floods every spring, or that roof leak isn’t repaired, or your bathroom fan still doesn’t work mold will eventually return.
That’s why we identify moisture sources during inspection. You need to know what’s causing the problem so you can address it. Sometimes it’s simple: fix a leaky pipe, improve ventilation, run a dehumidifier. Sometimes it requires bigger fixes like foundation waterproofing or roof repairs.
We’re honest about what we find. If there’s a moisture issue that needs attention, we tell you. Our job is to remove the mold that’s there and give you the information you need to keep it from coming back.
Proper remediation plus fixing the moisture source equals a mold-free home long-term.
Local Resources
Useful Links
Other Services we provide in Somerton
