Hear from Our Customers
You stop wondering if that musty smell is dangerous. Your kids’ allergies calm down. You’re not embarrassed when guests come over.
The air in your home feels different when mold isn’t quietly growing behind walls or under floors. You breathe easier, literally. No more waking up congested or dealing with that persistent cough that won’t quit.
Your property value stays intact. In Sellersville, where the median home is worth $386,294, mold can tank that number by 20-37% if left unchecked. Half of potential buyers will walk away the moment they hear “mold issue.” Getting it handled by certified mold specialists means you protect what you’ve built.
This isn’t just about removing visible spots. It’s about restoring your home to a place where you actually want to spend time. Where you’re not constantly worried about what’s growing in places you can’t see.
Mack’s Mold Removal has served Bucks County for over 27 years. We’re IICRC certified, which means our mold removal specialists follow the actual protocols that work, not shortcuts that leave problems behind.
Sellersville has unique challenges. With 34% of homes built before 1939 and 18% of properties at flooding risk, older construction and moisture issues create perfect conditions for mold. We’ve seen it all in this area, from basement seepage in historic homes near Main Street to attic mold in newer developments off Route 113.
You’re not getting a national chain that doesn’t know the area. You’re getting local mold experts who understand how homes are built here, what causes problems, and how to fix them permanently.
First, we come out for a free inspection. No charge, no pressure. We use infrared cameras and moisture meters to find mold you can’t see and identify what’s causing it. Most mold problems aren’t about the mold itself, they’re about water getting where it shouldn’t.
Once we know what we’re dealing with, you get a clear estimate. We explain what needs to happen, why it needs to happen, and what it costs. If insurance is involved, we’ll work with them directly.
During remediation, we contain the area so mold spores don’t spread to clean parts of your home. We remove contaminated materials properly, treat affected surfaces with EPA-approved methods, and use HEPA filtration to clean the air. Then we address the moisture source, whether that’s a leaky pipe, poor ventilation, or water intrusion.
After the mold is gone, we verify the air quality and make sure the problem won’t come back. If repairs are needed, we handle that too. You’re not coordinating multiple contractors or wondering if the job was done right.
Ready to get started?
You get a thorough inspection using professional-grade equipment, not just someone eyeballing your walls. Our mold and mildew experts test air quality and surface samples when needed to understand exactly what’s growing and how widespread it is.
The remediation process includes proper containment, safe removal of affected materials, treatment of surfaces, and HEPA air scrubbing. We don’t just spray something and hope for the best. We follow IICRC standards because that’s what actually works.
In Sellersville, basements are a common problem area. The older housing stock and clay-heavy soil mean water finds its way in. We see mold in crawl spaces, behind finished basement walls, and around old stone foundations regularly. Our team knows how to work in these spaces without tearing apart more than necessary.
We also handle the source of the moisture. If your mold is caused by a roof leak, poor grading, or HVAC condensation, we identify it and help you fix it. Otherwise, you’re just removing mold that will grow back in six months.
After remediation, you get documentation. If you’re selling your home or dealing with insurance, you’ll have proof the work was done correctly by certified professionals.
You might see it, usually as black, green, or white patches on walls, ceilings, or around windows. But plenty of mold grows where you can’t see it, behind drywall, under flooring, or in attics.
The smell is often the first clue. That musty, earthy odor isn’t just unpleasant, it’s a sign mold is actively growing somewhere. If you notice it in your basement, bathroom, or after any water damage, don’t ignore it.
Health symptoms matter too. If you’re dealing with a stuffy nose, sore throat, coughing, or burning eyes that get better when you leave the house, mold could be the cause. People with asthma or allergies usually notice it first. In Sellersville’s older homes, mold often hides in places with poor ventilation or past water issues.
Small surface mold on non-porous materials like tile might be manageable with proper precautions. But if it’s larger than a few square feet, inside walls, or caused by contaminated water, you’re risking your health and making the problem worse.
DIY removal often spreads mold spores throughout your home. Without proper containment and air filtration, you’re just moving the problem around. Scrubbing visible mold without addressing the moisture source means it grows back, sometimes in as little as 24-48 hours.
Black mold and other toxic varieties require professional handling. Disturbing them without the right equipment can release high concentrations of spores into the air you’re breathing. Our mold removal specialists use containment barriers, negative air pressure, and HEPA filtration to prevent cross-contamination. We also have the tools to find hidden mold and the training to remove it safely.
Most jobs in Sellersville run between $1,500 and $4,000, but it depends entirely on how much mold there is and what’s causing it. A small bathroom issue costs less than a flooded basement with mold throughout the framing.
The national average is around $2,300, but Sellersville’s older homes sometimes need more work. If we’re dealing with a stone foundation, outdated waterproofing, or mold that’s been growing unnoticed for months, costs go up. On the other hand, catching it early keeps the price down.
We give you a clear estimate after the free inspection. No surprises, no hidden fees. If your homeowner’s insurance covers it, we’ll work with them directly. Many policies cover mold remediation if it’s caused by a covered event like a burst pipe. We help you navigate that process so you’re not stuck figuring it out alone.
Small jobs might take a day or two. Larger remediation projects can take a week or more, depending on the extent of the contamination and what needs to be removed or repaired.
The inspection happens first and usually takes a couple of hours. Once we have a plan and you approve the estimate, we schedule the actual remediation. Containment and removal are the most time-intensive parts. After that, we need time for treated areas to dry completely before reconstruction begins.
You don’t have to leave your home for most projects, especially if the mold is contained to one area like a basement or bathroom. We seal off the work zone to protect the rest of your house. For extensive contamination or if someone in your home has serious respiratory issues, we might recommend staying elsewhere temporarily. We’ll be upfront about that during the inspection.
Not if we fix what caused it in the first place. Mold needs moisture to grow. Remove the moisture source, and mold can’t survive.
This is where most mold removal fails. A crew comes in, tears out moldy drywall, sprays some antimicrobial solution, and leaves. Three months later, the mold is back because the leaky pipe or condensation issue was never addressed. Our approach is different. We find the source during inspection and make sure it’s fixed as part of the process.
In Sellersville, common moisture sources include basement seepage, roof leaks, poor attic ventilation, and old plumbing. We identify which one is feeding your mold problem and address it directly. If you need a waterproofing upgrade or better ventilation, we’ll tell you. Once the moisture is controlled and the mold is properly remediated, it stays gone.
Usually not. If you can see mold or smell it, you have a mold problem that needs to be removed. Testing just delays the solution. The CDC doesn’t recommend routine mold testing for exactly this reason.
There are situations where testing makes sense. If you’re experiencing health symptoms but can’t find visible mold, air sampling can confirm whether spores are present and help us locate hidden growth. Post-remediation testing can verify that our work was successful and your air quality is back to normal.
Some insurance companies require testing as part of a claim. If that’s your situation, we handle it. But for most homeowners in Sellersville dealing with visible mold or obvious moisture damage, the best move is to skip straight to professional mold remediation. You’ll save time and money, and you’ll get the problem fixed faster.
Local Resources
Useful Links
Other Services we provide in Sellersville
