Hear from Our Customers
You’ve noticed the symptoms. Someone’s coughing more than usual. The kids’ allergies won’t quit. You wake up congested even though you’re not sick. You clean constantly but something still feels off.
The air inside your Roxborough home could be up to five times more polluted than the air outside. That’s not a scare tactic—it’s what happens when homes are well-sealed without proper ventilation, especially in older properties like the ones common in this area.
A home air quality test shows you exactly what’s in your air. Mold spores, dust mites, pet dander, elevated particulates, excess moisture, dangerous gas concentrations. We use infrared cameras and moisture meters to find problems you can’t see—the stuff hiding behind walls, under carpets, in your HVAC system. Once you know what you’re dealing with, you can actually fix it instead of masking symptoms or guessing.
We serve homeowners throughout Philadelphia County, including Roxborough, Manayunk, and the surrounding areas. We know this housing stock—median construction year of 1951 means a lot of homes here were built before modern ventilation standards existed.
That matters because older homes in Roxborough trap moisture differently. They weren’t designed for today’s HVAC systems. Basements stay damp. Attics don’t breathe right. Bathrooms and kitchens create humidity pockets that never fully dry out.
We’ve tested hundreds of homes across Bucks, Montgomery, Delaware, Chester, and Philadelphia counties. Our team uses the same advanced equipment and EPA-standard testing methods every time, so you get accurate results and a clear plan forward.
First, we walk through your home and talk about what you’ve been noticing. Health symptoms, musty smells, visible moisture, recent water issues—all of it matters. This isn’t a checklist visit. We’re looking for clues about where problems might be hiding.
Next, we use infrared cameras to detect temperature differences that signal moisture intrusion. We check humidity levels in different rooms. We take air samples to capture what’s actually floating around in your home—mold spores, allergens, particulates. If we suspect mold, we also do surface testing in areas that look questionable.
All samples go to a lab for analysis. You get a detailed report that shows exactly what we found, where the problems are, and what’s causing them. We explain the results in plain terms and walk you through your options. If remediation is needed, we build a customized plan to remove the problem and prevent it from coming back.
Ready to get started?
A residential air quality test from us includes visual inspection of your entire home, air sampling in multiple rooms, surface testing where needed, moisture mapping with professional-grade meters, and infrared thermal imaging to find hidden problems. You’re not paying for a guy with a clipboard. You’re getting technology that reveals what’s actually happening inside your walls and air.
Roxborough’s humid climate creates perfect conditions for mold growth. The Philadelphia-Reading-Camden metro area ranks 12th in the nation for fine particle pollution and 23rd for ozone levels. That’s outdoor air. Inside your home, you’re also dealing with whatever’s growing or accumulating in your specific property.
About 34% of homes in this area were built before 1940. Many have basements that were never properly waterproofed. Ventilation systems that can’t keep up. Insulation that traps moisture instead of managing it. Our testing accounts for these local factors because they directly affect what we find and how we address it.
You’ll receive documentation of everything we discover, lab results that identify specific mold types if present, and a clear explanation of what needs to happen next. No jargon. No upselling. Just honest information so you can make the right call for your home and family.
If anyone in your home has unexplained respiratory symptoms, allergies that won’t improve, or frequent headaches and fatigue, your air quality might be the problem. Visible mold, musty odors, recent water damage, or excessive humidity are obvious red flags.
But plenty of homes have air quality issues without obvious signs. Mold hides behind walls and under flooring. Dust mites and allergens build up in HVAC systems. Particulate levels rise without you noticing until someone gets sick.
Testing makes sense if you’ve tried everything else and symptoms persist. It’s also smart after any flooding, roof leaks, or plumbing issues—even if you cleaned up right away. Moisture can linger in places you can’t see and create problems months later.
A mold air test specifically measures mold spore levels in your air and identifies which types of mold are present. It’s focused testing when you suspect mold but can’t see it or want to confirm what you’re dealing with.
Full air quality testing is broader. We’re looking at mold, but also allergens like dust mites and pet dander, particulate matter, humidity levels, and potential VOCs depending on your situation. It gives you a complete picture of what’s affecting your indoor air.
Most homeowners in Roxborough benefit from comprehensive testing because problems rarely exist in isolation. High humidity that causes mold also promotes dust mites. Poor ventilation that traps allergens also concentrates particulates. We test for everything so you’re not guessing about what’s making your family sick.
The on-site inspection and testing usually takes two to three hours depending on your home’s size and the scope of testing needed. We’re not rushing through. We’re checking every area that could affect your air quality—basement, attic, bathrooms, kitchens, HVAC system, anywhere moisture or mold typically shows up.
Air samples need 24 to 48 hours for lab analysis. Surface samples can take a bit longer if we’re identifying specific mold species. You’ll get a full report with results and our recommendations within a few days of testing.
If you request a quote online, we’ll call you back within 24 to 48 hours to discuss your situation and schedule testing. We move quickly because we know you’re dealing with health concerns or trying to protect your family. The faster you get answers, the faster you can fix the problem.
No. Air quality testing is completely non-invasive. We use infrared cameras to see inside walls without opening them up. Moisture meters detect dampness through surfaces. Air sampling just means running equipment that pulls air through collection devices.
Surface testing involves swabbing or tape-lifting samples from areas where we see potential mold growth. It doesn’t damage anything. If we need to inspect inside a wall or ceiling, we’ll discuss that with you first and explain exactly why it’s necessary.
Most testing requires zero repairs afterward. You’re getting information and documentation, not construction work. If we do find problems that need remediation, that’s a separate process we’d plan with you after you’ve seen the test results and decided how to move forward.
We give you a detailed report showing what we found, where it is, and what’s causing it. If it’s mold, we identify the type because that determines the removal strategy. Some mold is relatively harmless. Other types require careful remediation following EPA standards.
You’ll get a customized plan that addresses the source of the problem, not just the symptoms. If it’s a moisture issue, we explain where water is coming from and how to stop it. If it’s ventilation, we talk about airflow solutions. If it’s contamination that needs removal, we outline the remediation process.
You’re never locked into anything. The testing gives you information. What you do with it is your call. Most homeowners move forward with remediation when they see the results because they finally understand what’s been affecting their family’s health. We handle the work safely, document everything, and make sure the problem doesn’t come back.
Cost depends on your home’s size, the type of testing you need, and how many areas we’re sampling. A basic mold air test runs less than comprehensive testing that includes multiple sample types and full moisture mapping.
We give you an accurate quote after learning about your situation. That means asking about your home, what symptoms you’re experiencing, and what you’ve already tried. We’re not going to quote you for testing you don’t need or skip testing that would actually help.
Request a quote online and we’ll call you within 24 to 48 hours to discuss pricing and options. Most Roxborough homeowners find testing is a small investment compared to ongoing medical bills, medications for symptoms that won’t quit, or major remediation work that could’ve been prevented with early detection.
Local Resources
Useful Links
Other Services we provide in Roxborough
